MC NYLON is recognized as the most widely used and known Engineering Plastic in the current market. PA6 has the best performance, very tough, even at low temperatures, and high surface hardness, mechanical lower shock, and abrasion resistance. Combined with these characteristics and good insulation, and chemical properties, it has become common-level materials. It`s widely used in a variety of mechanical structures and spare parts. Compared to PA6, PA66 own the higher hardness, rigidity, better resistance to wear and heat deflection temperature. Temperature resistance from -40℃ to 110 ℃.
Advantages:
Disadvantages:
Mc Nylon Sheet, Blue Mc Nylon Sheet, Black Mc Nylon Sheet, Yellow Mc Nylon Sheet,Nylon Board SHENZHEN XIONGYIHUA PLASTIC INSULATION LTD , https://www.xyhplastic.com
Advanced Type Double Suction Centrifugal Water Pump
Characteristics
·Type:
·Media:
·Application:
centrifugal
Multi-fluid
suction
·Other characteristics:
·Flow rate:
·Head
Double-aspiration
Min.:0m3/h
Min: 0m
Single-stage
Max.: 11600m3/h
Max: 200m
Description
The S series pumps are single stage, double suction; horizontal split case pumps designed for high volume water transfer in a wide range of applications. Centurion pumps are available in 43 sizes ranging from 80mm to 400mm discharge and capable of capacities up to 4000 cubic meters per hour and heads up to 160 meters. Centurion pumps offer ease of maintenance with simple assembly/disassembly (no requirement for special tools). All major wear components and replaceable parts are easily accessible and can be changed out with minimal effort and downtime, without removing the suction and discharge piping.
Features
Adopts horizontal, vertical axis medium open type double pump shell structure, lining for cemented carbide or rubber has good wear-resisting, corrosion resistance and high reliability.
High efficiency hard alloy, and low NPSH
To meet the different operation conditions, adopted the brief type structure bearing parts, selected high bearing capacity design, alloy bearing grease lubrication oil.
Through adjusting the clearance between protection board and impeller, ensuring the pump efficient operation
Using packing seal, impeller sealing, and container type mechanical seal to adapt to different operating mode requirement.
Pump and drive can choose straight league transmission, triangle, hydraulic transmission device coupled transmission, reducer drive.
The outflow direction can be installed by eight Angle rotation to adapt to different site installation condition.
Available to use multiple series, to satisfy the long-distance transmission requirements
Â
Item
Split case/double suction water pumps
Model
MS
Material
Cast iron, SS 304,SS 316L, etc
Color
Decided by user
Mode
Horizontal
Impeller
Double suction impeller
Drive
Belt or coupling
Seal
Packing seal or mechanical seal
Speed
2950r/m, 1450r/min, 970r/min,730r/min,585r/min
Theory
Centrifugal pump
Structure
Single stage pup
Usage
Clean water, raw water, sea water etc.
Power
Electric motor or Diesel engine
Standard
ISO
Application
Plant, mine, power station, urban water supply, irrigation etc
Outlet diameter
1 inch to 32 inch
Capacity
25-15000m3/h
Head
8.6-200m
Power
22-1250kw
Warranty
1year
Certificate
ISO9001
OEM
Acceptable
Feature
High flow rate, high efficiency, easy maintenance
Application
Fire Protection
Water Transfer
Municipal Water Supply
Irrigation
Industry
Process Water
Raw Water Supply
Dewatering (Clean Water)
Flood Mitigation
Details
Bearing Assembly
Bearing: SKF TIMKENÂ
Shaft: SS 410
Wet End
A05 Polyurethane
A07 Rubber
A49
Fastener
Galvanized
Stainless Steel
Sealing
Mechanical Seal
PTFE Packing
Hi-Seal
FAQ
A: What kind of company you are?
Q: We are centrifugal pump manufacture located in Boy Town, Baoding, China, with more than 20years experiences. We were gaining good reputation among our customers for our professional, warm and thoughtful service. Because we know that a long terms business based on the quality control, price, packing, delivery time etc.
A: What's the quality assurance you provided and how do you control quality?
Q: Established a procedure to check products at all stages of the manufacturing process: Casting, Heat treatment, Machining, Assembly, and Testing.
Q: Can you install the motor or diesel engine with the pump for us?
A: yes, we can, it's no problem, and we are experienced in this.
Q: What's your MOQ?
A: Trial sample order is OK.
Q: What are your payment terms?
A: T/T, L/C, D/P, D/A......
Q: What certificates do you have?
A: CE, ISO 2008, UL.....
Q: How about the warranty?
A: One year warranty for pumps, it depends on other pump working condition details.
Q: What is the delivery time?
A: 15-30 days according to customer quantities.
Q: Can you do OEM brand?
A: Yes, Welcome.
Q: What information should IÂ offer to get pump solution?
1, Material:
2, Head:Â Â Â Â Â m
3, Flow:Â Â Â Â m3/h
4, Medium size:Â Â Â Â mm
5, Particle shape (smooth or sharp):
6, Medium pH level:
7, Temperature:
8, Drive type:
9. Power supply:
Contact me for detail offer with curve and drawing
Â
Advanced Type Double Suction Centrifugal Water Pump
Characteristics
·Type:
·Media:
·Application:
centrifugal
Multi-fluid
suction
·Other characteristics:
·Flow rate:
·Head
Double-aspiration
Min.:0m3/h
Min: 0m
Single-stage
Max.: 11600m3/h
Max: 200m
Description
The S series pumps are single stage, double suction; horizontal split case pumps designed for high volume water transfer in a wide range of applications. Centurion pumps are available in 43 sizes ranging from 80mm to 400mm discharge and capable of capacities up to 4000 cubic meters per hour and heads up to 160 meters. Centurion pumps offer ease of maintenance with simple assembly/disassembly (no requirement for special tools). All major wear components and replaceable parts are easily accessible and can be changed out with minimal effort and downtime, without removing the suction and discharge piping.
Features
Adopts horizontal, vertical axis medium open type double pump shell structure, lining for cemented carbide or rubber has good wear-resisting, corrosion resistance and high reliability.
High efficiency hard alloy, and low NPSH
To meet the different operation conditions, adopted the brief type structure bearing parts, selected high bearing capacity design, alloy bearing grease lubrication oil.
Through adjusting the clearance between protection board and impeller, ensuring the pump efficient operation
Using packing seal, impeller sealing, and container type mechanical seal to adapt to different operating mode requirement.
Pump and drive can choose straight league transmission, triangle, hydraulic transmission device coupled transmission, reducer drive.
The outflow direction can be installed by eight Angle rotation to adapt to different site installation condition.
Available to use multiple series, to satisfy the long-distance transmission requirements
Â
Item
Split case/double suction water pumps
Model
MS
Material
Cast iron, SS 304,SS 316L, etc
Color
Decided by user
Mode
Horizontal
Impeller
Double suction impeller
Drive
Belt or coupling
Seal
Packing seal or mechanical seal
Speed
2950r/m, 1450r/min, 970r/min,730r/min,585r/min
Theory
Centrifugal pump
Structure
Single stage pup
Usage
Clean water, raw water, sea water etc.
Power
Electric motor or Diesel engine
Standard
ISO
Application
Plant, mine, power station, urban water supply, irrigation etc
Outlet diameter
1 inch to 32 inch
Capacity
25-15000m3/h
Head
8.6-200m
Power
22-1250kw
Warranty
1year
Certificate
ISO9001
OEM
Acceptable
Feature
High flow rate, high efficiency, easy maintenance
Application
Fire Protection
Water Transfer
Municipal Water Supply
Irrigation
Industry
Process Water
Raw Water Supply
Dewatering (Clean Water)
Flood Mitigation
Details
Bearing Assembly
Bearing: SKF TIMKENÂ
Shaft: SS 410
Wet End
A05 Polyurethane
A07 Rubber
A49
Fastener
Galvanized
Stainless Steel
Sealing
Mechanical Seal
PTFE Packing
Hi-Seal
FAQ
A: What kind of company you are?
Q: We are centrifugal pump manufacture located in Boy Town, Baoding, China, with more than 20years experiences. We were gaining good reputation among our customers for our professional, warm and thoughtful service. Because we know that a long terms business based on the quality control, price, packing, delivery time etc.
A: What's the quality assurance you provided and how do you control quality?
Q: Established a procedure to check products at all stages of the manufacturing process: Casting, Heat treatment, Machining, Assembly, and Testing.
Q: Can you install the motor or diesel engine with the pump for us?
A: yes, we can, it's no problem, and we are experienced in this.
Q: What's your MOQ?
A: Trial sample order is OK.
Q: What are your payment terms?
A: T/T, L/C, D/P, D/A......
Q: What certificates do you have?
A: CE, ISO 2008, UL.....
Q: How about the warranty?
A: One year warranty for pumps, it depends on other pump working condition details.
Q: What is the delivery time?
A: 15-30 days according to customer quantities.
Q: Can you do OEM brand?
A: Yes, Welcome.
Q: What information should IÂ offer to get pump solution?
1, Material:
2, Head:Â Â Â Â Â m
3, Flow:Â Â Â Â m3/h
4, Medium size:Â Â Â Â mm
5, Particle shape (smooth or sharp):
6, Medium pH level:
7, Temperature:
8, Drive type:
9. Power supply:
Contact me for detail offer with curve and drawing
Â
♦ High strength and stiffness
♦ High impact and notch impact strength
♦ High heat deflection temperature
♦ Good at dampening
♦ Good abrasion resistance
♦ Low coefficient of friction
♦ Good chemical stability against organic solvents and fuels
♦ Excellent electrical properties, ease of printing and dyeing
♦ Food safe, noise reduction
♦ Poor dimension stability, electrical and mechanical properties may become affected by absorbing moisture or water
♦ Poor acidproof ability, can`t dye with acid or touch overmuch acid
♦ Poor lightfastness, poor endurance in pollution
Advanced Type Double Suction Centrifugal Water Pump
Model NO.: MS
Impeller: Closed
Usage: Pump
Theory: Centrifugal Pump
Structure: Single-Stage Pump
Power: Electric, Diesel
Material: Stainless Steel, Cast Iron
Wet End: Stainless Steel, Cast Iron
Bearing: NSK, SKF, Timken,
Sealing: Mechanical Seal, PTFE Packing, Hi-Seal
Lubrication: Grease and Oil
Color: Customer Specifications Upon Request
Standard or Nonstandard: Standard
Trademark: Modo
Transport Package: Wooden Case
Specification: SGS, ISO
Origin: Hebei China
HS Code: 8413810090
Model NO.: MS
Impeller: Closed
Usage: Pump
Theory: Centrifugal Pump
Structure: Single-Stage Pump
Power: Electric, Diesel
Material: Stainless Steel, Cast Iron
Wet End: Stainless Steel, Cast Iron
Bearing: NSK, SKF, Timken,
Sealing: Mechanical Seal, PTFE Packing, Hi-Seal
Lubrication: Grease and Oil
Color: Customer Specifications Upon Request
Standard or Nonstandard: Standard
Trademark: Modo
Transport Package: Wooden Case
Specification: SGS, ISO
Origin: Hebei China
HS Code: 8413810090