When the drilling machine is used for a certain period of time, it will inevitably accumulate a lot of mud and oil on the equipment. If it is necessary to inspect and repair the machine parts, it must be the right cleaning of the drilling machine equipment. After work, preparations for disassembly and repairs are performed. In this way, the work efficiency of the repaired equipment can be greatly improved, and the quality of drilling machine repairs can also be guaranteed to a certain extent. Cleaning the drilling rig seems to be simple, but it is also a job that requires special care. At the same time, it is also the first necessary step in the maintenance of the drilling rig equipment. It is also an important preparation. The quality after washing has a great influence on the performance of the drilling machine after maintenance, and different cleaning methods will also have different effects. Therefore, when doing the cleaning work for the drilling rig, it also needs to comply with many related principles. To avoid the rig washing down, you will be polluted to the surrounding environment. Because the working environment for drilling rigs is open-air, and it is often the machinery will be moved around, to avoid not sticking with sludge. Therefore, when cleaning the drilling rig, the sludge inside and outside the machine must be cleaned, and the sludge cannot be brought into the next workshop and operation procedures. All the sludge that has been cleaned up is disposed of in a centralized manner and it is not possible to discard the polluted environment at will. In the process of cleaning must be careful, every part must be cleaned, and when the drilling machine's parts are in maintenance, different parts are not the same for their own degree of cleanliness. And in the process of machine assembly, the performance of the components that can be used in combination is higher than those of non-matching components. In order to prevent corrosion of the parts, it is necessary to park the parts for a period of time after cleaning, and when selecting the cleaning liquid, it is also necessary to consider its anti-corrosion performance and other anti-rust preparation work. of.
Fin tube coils are commonly used for gas-liquid exchange. Heat transfer on the gas side is usually much lower than on the liquid side, and heat sinks are required on the gas side. The outer fins of the tube may be normal on a single tube, or maybe transverse, spiral, or longitudinal. Longitudinal fins are commonly used in a double tube or shell heat exchangers without baffles. A fluid may be a gas or a viscous liquid. Our finned tube coil products range from small applications to large commercial and industrial projects.
Coiled Steel Pipe,Stainless Steel Coiled Pipe,Fin Tube Coils,Finned Tube Coils Murphy Thermal Energy Co., Ltd. , https://www.murphyfinnedtube.com